Adsorption dryers are used to remove water content from compressed air in the case of high air cleanness requirements that refrigerant dryers cannot fulfil. The dew point can be set to –250C, –400C or even nawet –700C. These dryers work fully automatically. Due to high sensitivity of the desiccant (silica gel or alumina) to oil contaminant, it is recommended that an S filter be used before dryer and a Q filter after dryer (to remove desiccant particles crumbled by air movement).
| Type | Air flow | Connection | Dimensions
(L x W x H)
mm | Weight
kg |
| m3/h | m3/min |
| HHS 001 | 8 | 0,13 | G 1/4 | 312 x 210 x 390 | 9 |
| HHS 003 | 15 | 0,25 | G 1/4 | 312 x 210 x 565 | 13 |
| HHS 004 | 25 | 0,42 | G 1/4 | 359 x 210 x 815 | 17 |
| HHS 006 | 35 | 0,58 | G 1/4 | 359 x 210 x 1065 | 24 |
| HHS 009 | 56 | 0,92 | G 3/8 | 436 x 300 x 1185 | 52 |
| HHS 012 | 72 | 1,20 | G 3/8 | 436 x 300 x 1410 | 65 |
| HHS 014 | 86 | 1,40 | G 1/2 | 436 x 300 x 1610 | 77 |
| HHM 024 | 145 | 2,40 | G 1 | 565 x 490 x 1730 | 121 |
| HHM 033 | 200 | 3,30 | G 1 | 595 x 490 x 1740 | 142 |
| HHM 043 | 255 | 4,30 | G 1 | 634 x 490 x 1810 | 176 |
| HHM 060 | 360 | 6,00 | G 1 | 660 x 490 x 1840 | 220 |
| HHM 067 | 400 | 6,70 | G 1 1/2 | 821 x 590 x 1880 | 280 |
| HHM 103 | 620 | 10,3 | G 1 1/2 | 874 x 590 x 1880 | 365 |
| HHM 125 | 750 | 12,5 | G 1 1/2 | 905 x 590 x 2000 | 465 |
| HHM 160 | 950 | 15,8 | G 1 1/2 | 1020 x 780 x 2020 | 560 |
| HHL 200 | 1200 | 20,0 | DN50 | 1060 x 840 x 2080 | 640 |
| HHL 260 | 1550 | 25,8 | DN65 | 1270 x 900 x 2120 | 830 |
| HHL 335 | 2000 | 33,3 | DN65 | 1350 x 990 x 2160 | 955 |
| HHL 415 | 2500 | 41,7 | DN80 | 1530 x 1040 x 2210 | 1075 |
Maximum pressure: 1.6MPa for HHS 001 ÷ HHM 160; 1.0MPa for HHL 200 ÷ HHL 415.
Feed voltage: 400V.
Dew point: -400C
|
